Defence Colony, Ambala, Haryana
Send E-mail
Send SMS
Home»Our Products»

Fluid Machine Lab Equipment

We are manufacturer, exporter and supplier of Fluid machine lab equipment.

REQUEST CALLBACK
Approx. Rs 3.25 Lakh / pcs
Get Best Quote

Pelton Turbine Test Rig: SIGMA 0058: Test rig consists of a Pelton wheel water Turbine, designed for laboratory experimental purposes and to conduct test in metric units. The specifications of the turbine are as follows:-
Design Speed - 1100 RPM.
Output Power - 2.0 KW
The turbine consists of a cast iron body with a large transparent acrylic window, a nozzle and spear arrangement, a rotor assembly of shaft, runner and a brake drum all mounted on a sturdy base frame. The pelton buckets and nozzle are made of gunmetal and the spear made of brass for corrosion resistance. The input to the turbine is controlled by adjusting the spear position with a hand wheel. A rope brake arrangement with a spring balance is provided for loading the turbine. The transparent perspex sheet side casing is provided for visual observation of flow on the buckets. Water inlet pressure is measured by a pressure gauge. Water to the turbine is provided by a centrifugal monoblock pump set of 5 HP capacities. The pump operates on 440Volts, 3 Phase, 50 Hz line. Other standard accessories include a DOL starter, switch, flow control gate valve, suitable piping. Flow measuring unit consists of a venturimeter with pressure taps connected to two pressure gauges mounted on a panel board. The complete test rig is mounted on a storage tank of suitable capacity. The tank is provided with FRP lining for total rust protection.



Additional Information:
  • Minimum Order Quantity: 1 pcs
Yes! I am interested
REQUEST CALLBACK
Approx. Rs 5.5 Lakh / Piece
Get Best Quote
Product Details:
Minimum Order Quantity1 Piece
Approximate Order Value200
Usage/ApplicationCivil engireening
Currency3
COMPRESSION TESTING MACHINE AUTOMATIC:


SIGMA 458CTM: The Automatic Compression Testing Machine has all features of Micro Controller based Compression Testing Machine.


FEATURES:


  • An automatic load release facility
  • Support for data transmission over distances upto several kilometers. This is useful for testing in the field. (Optional feature)
  • Measurements of Strain with a resolution of up to 0.001 mm (optional feature)
  • Measurement of Flexural Strength (optional feature)
  • Facility to enter the required pace rate, at the beginning of the run

TECHNICAL SPECIFICATION:

  • An intuitive and easy to use graphical user interface
  • Facility to list all the runs stored in the digital head/box
  • Facility to download and plot the data for a selected run
  • Facility to save test-data along with other information about the sample such as age, sample number and batch name
  • On -line graph of Load Vs Time
  • Numerical display of the instantaneous value of the load
  • Automatic display of a breaking load at the end of the test
  • Log-in controlled multilevel access
  • A facility for creating users and enabling /disabling their log-in permissions
  • A sophisticated reporting tool which can be used to generate-Reports for individual samples with data in graphical of tabular form
  • Load Vs Time Plot
  • Stress Vs Time Plot
  • Calibration report
  • Batch Summary report
  • Selective deletion of individual and multiple sample records.

Yes! I am interested
REQUEST CALLBACK
Approx. Rs 95,000 / PCS
Get Best Quote

Marshal Stability Test Apparatus: - SIGMA 459MST:

 

The test is intended for the measurement of the resistance to plastic flow of cylindrical specimens of bituminous paving mixture loaded on the lateral surface. For use with hot mixture containing asphalt or tar and aggregate up to 25.4 mm maximum sizes.


The marshal stability test apparatus consists of following:


  • Marshal Load Frame 50kN capacity, Electrically Operated, with platen rate travel of 50.8mm/min. Safety cutoff switch is provided with the machine to avoid from overloading – 1No.
  • Marshal Compaction Pedestal for compaction of 101.6mm (4”) dia specimen – 1No.
  • Breaking head assembly to accommodate specimen of 101.6mm dia with dial gauge 0.01 x 25mm travel – 1 Set.
  • Specimen Extractor (Platen, Steel Ball & Extracting Rod) – 1 Set.
  • Marshal Specimen Mould 101.6mm dia (4”) complete with collar and base plate – 3 Nos.
  • Marshal Compaction Hammer 4.53kg (10 lb) x 457mm (18”) drop height – 2 Nos.
  • Proving Ring, 25kN or 30kN (as per requirement) capacity fitted with dial gauge with set of loading pads and calibration certificate in a nice wooden carrying case.


Additional Information:
  • Minimum Order Quantity: 1 PCS
Yes! I am interested
REQUEST CALLBACK
Approx. Rs 6.25 Lakh / PCS
Get Best Quote
Universal Tensile Tester Computerized: - SIGMA 460UTT:

Specifications:

 

  • Loading System - AC/DC drive.
  • Max. Capacity - available from 10 Kgf to 10,000 Kgf.
  • Test Width (mm) approx. - 400mm
  • Crosshead Travel (mm) approx. - 1000mm
  • Effective Stroke (mm) approx. - 800mm
  • Crosshead Speed (mm/min) – up to to 500 mm/min(approx)
  • Crosshead Return Speed – up to 500mm/min
  • Tensile Load Measurement Accuracy - +/- 1%
  • Stroke Limiter upper/lower - 2 points (upper/lower)
  • Power : 220-240 Volts, 1-phase, 50Hz
  • Test parameters displayed with graph simultaneously
  • Real time graphic display of data
  • Overlay display of data cur ve possible during test
  • Selectable graphical display presentation
  • Other test methods can be programmed by the operator
  • Return after a test is selected
  • Calibration File to calibrate the unit.


Additional Information:
  • Minimum Order Quantity: 1 PCS
Yes! I am interested
REQUEST CALLBACK
Approx. Rs 6.35 Lakh / PCS
Get Best Quote

Universal Testing Machine Computerized:- SIGMA 461UTMC:

Specifications:

· Control Unit :

·  Capacity: Available from 5 to 300 Ton.

·  Min Resolution: 1/10000.

·  Accuracy: ±1%.

·  Driving Method: Hydraulic System.

·Ram Stroke (mm): from 100 to 250 depending upon machine capacity.

·Effective Column Interval (mm): 300 to 750 depending upon machine capacity.

·Crosshead Speed (mm/min): from 50 to 100 depending upon machine capacity.

·  Testing Speed (mm/min): from 50 to 250 depending upon machine capacity.

· Machine weight: 1500 to 4000kg depending upon machine capacity.

· Power: 220/440V, 50HZ or as desired by customers.

· Tension (mm): Max.Space:700, Grip for Rod: 10 ~ 70, Grip for Plate: 13~ 65x90.

· Compression: Max. Space: 700, Compression Plate:160(Dia.)

· Transverse & Bending (mm): Max.Space:810, Punch Tip: R22x140, Roller: 50(Dia.)x161.

·  Above three specifications shall depend upon machine capacity.



Additional Information:
  • Minimum Order Quantity: 1 PCS
Yes! I am interested
REQUEST CALLBACK
Approx. Rs 3.25 Lakh / PCS
Get Best Quote
CBR TESTING MACHINE:- SIGMA 462CBRTM: To know C.B.R. Values in situ, it is useful in determining the load carrying capacity in the field when in-place density and water contents are such that the degree of saturation is 80% or greater, when material is conhensionless and coarse grained, such that it is not affected by changes in water contents and when the material has been in-place for considerable time. The loading is affected by means of a mechanical load frames which can be fixed to the underside of a truck. Salient

SPECIFICATION OF CBR TESTING MACHINE: Mechanical screw loading jack, 10,000 kg. Capacity with U-bracket and swivel head. Penetration piston, 50 mm dia. threaded at the upper end. Extension rods consisting of 2 lengths 5 cm. 2 lengths 10 cm., 1 length 30 cm.,1 length 50 cm., and 1 length 100 cm., used as spacers between the proving ring and penetration piston. The lengths are machined from steel tubing. Connector set, has eight connectors for coupling the penetration piston and proving ring assembly either directly or through extension pieces. Dial gauge support of seamless pipe construction. It stands 30 cm high and 45 cm wide at the base. Provided with a quick release screw type clamp capable of sliding and locking anywhere along 2 meter length of the bridge. Supplied with annular metal weight 5 kg., 250 mm dia with 53 mm dia central hole, Slotted metal weight 5 kg., 215 mm to 250 mm dia with 53 mm dia slot, 2 Nos. Slotted metal weights, 10 kg., and 215 mm to 250 mm dia with 53 dia slot 2 Nos.



Additional Information:
  • Minimum Order Quantity: 1 PCS
Yes! I am interested
REQUEST CALLBACK
Approx. Rs 2.6 Lakh / PCS
Get Best Quote

FRANCIS TURBINE TEST RIG:- SIGMA 463FT: a) Test rig consists of a Francis water turbine designed for laboratory experimental purpose and to conduct test in metric units. The specifications of the turbine are as follows: -Design Speed - 1500 RPM.

Capacity-3.7 KW. (5.0 HP): Design Head - 15-20m and 1800-2000 lpm. 
The unit consists of a cast iron spiral casing, a bearing pedestal, a rotor assembly of shaft, gunmetal runner and brake drum all mounted on a suitable sturdy base. Aerofoil shaped gunmetal guide vanes are provided in the turbine to regulate the flow into the runner. The guide vane opening adjustment is made through a hand wheel and a suitable link mechanism. A conical draught tube is connected to the turbine outlet by a bend. For observing the flow at the runner exit, a transparent window made of thick perspex tube is provided in between the turbine casing and the draft bend. A rope brake arrangement with a set of dead weights and spring balance is provided for loading the turbine. Pressure gauge and vacuum gauge are fixed at the inlet and outlet to measure the net supply head to the turbine.


b) Water to the turbine is provided by a centrifugal pump set of 15 HP capacities. The pump operates on 440Volts, 3 Phase, 50 Hz line.


c) Other standard accessories include a star-delta starter, switch, flow control valve, suitable piping.


d) Flow measuring unit consists of a venturimeter of size 100mm with pressure taps connected to two pressure gauges mounted on a panel board.

 

e) The complete test rig is mounted on a storage tank of suitable capacity. The tank is provided with FRP lining for total rust protection


Yes! I am interested
REQUEST CALLBACK
Approx. Rs 45,800 / Pc
Get Best Quote

Item Code: Sigma 07OM Orifice Meter Apparatus
DESCRIPTION of Orifice Meter Apparatus The apparatus consists of two pipelines emerging out from a common manifold. One pipeline contains a Venture meter and other contains an Orifice. The pressure tapings from the Venture meter and Orifice meter are taken to differential manometer to measure pressure difference. The Venturi meter & Orifice meter are connected in parallel and anyone of them can be put in operation by operating valves provided at the downstream. These valves can also regulate the flow. Present set-up is self-contained water re-circulating unit, provided with a sump tank and a centrifugal pump. Flow control valve and by-pass valve are fitted in water line to conduct the experiment on different flow rates. Flow rate of water is measured with the help of measuring tank and stopwatch
Experiments
• To determine the co-efficient of discharged through Venture meter and orifice meter.
• To measure discharge through Venturimeter and Orifice meter as flow meters.
Utilities Required
• Electric supply 0.5 kW, 220V AC, Single Phase
• Water supply Tap water connection” BSP Distilled water @ 60 liters (optional)
• Floor Area with Drain facility



Additional Information:
  • Minimum Order Quantity: 1 Pc
Yes! I am interested
REQUEST CALLBACK
Approx. Rs 78,000 / Piece
Get Best Quote
Product Details:
Minimum Order Quantity1 Piece
BrandSigma
Model11PST
ApplicationIndustrial, Laboratory

Item code: Sigma 11PST Pitot Static Tube Apparatus A Pitot tube is used to measure the local velocity at a given point in the flow stress. A pitot tube of standard design made of copper/SS is supplied and is fixed below vernier scale. The Vernier scale is capable to measure the position of Pitot tube in transparent pipe section. The pipe has a flow control valve to regulate the flow. A U - tube manometer is provided to determine the velocity head. Present set-up is self-contained water re-circulating unit, provided with a sump tank and a centrifugal pump etc. Flow control valve and by-pass valve are fitted in water line to conduct the experiment on different flow rates. Flow rate of water is measured with the help of measuring tank and stopwatch.
Experiments
• To find the point velocity at the center of a tube for different flow rates of water and
calibrate the Pitot tube.
• To plot velocity profile across the cross section of pipe
Utilities Required
• Electric supply 0.5 kW, 220V AC, Single Phase
• Water supply Tap water connection” BSP Distilled water @ 60 liters (optional)
• Floor Area with Drain facility


Yes! I am interested
REQUEST CALLBACK
Approx. Rs 56,000 / Pc
Get Best Quote

Item code: Sigma 08O&M Orifice & Mouthpiece Apparatus Set up consists of an adjustable head constant level tank, supply tank, measuring tank and pump for closed loop water circulation. The constant level tank is fitted with arrangement for creating jet using different interchangeable orifice and mouthpiece. A hook/pointer gauge for measuring x-y coordinates of jet is also fitted. The flow rate of water is measured using measuring tank and stop watch provided

Experiments of Orifice & Mouthpiece Apparatus

• To determine the co-efficient of discharge of different Orifice and mouthpiece

Utilities Required for Orifice & Mouthpiece Apparatus

• Electric supply 0.5 kW, 220V AC, Single Phase

• Water supply Tap water connection” BSP Distilled water @ 60 liters (optional)

• Floor Area with Drain facility



Additional Information:
  • Minimum Order Quantity: 1 Pc
Yes! I am interested
REQUEST CALLBACK
Approx. Rs 7,200 / Piece
Get Best Quote

Sigma-13CS
Compound Screw Jack: Consisting of a jack screw of 4 T.P.I. and double start carrying load platform. The nut of the screw is fitted on a pedestal bearing and is keyed to a worm gear of 40 teeth operated by a worm screw. The spindle of the warm screw is provided with an effort wheel of 15 cm diameter. Weights are not included.



Additional Information:
  • Minimum Order Quantity: 1 Piece
Yes! I am interested
REQUEST CALLBACK
Approx. Rs 92,500 / pc
Get Best Quote
Our firm has emerged as the leading manufacturer, exporter, trader and supplier of Bomb Calorimeters. Offered calorimeter is examined by our professionals on numerous parameters of quality in order to assure its flawlessness. This calorimeter is designed with optimum quality material and modern techniques keeping in mind the set norms. The offered calorimeter is commended among customers for its excellent finish & superior quality.
Features:
• Accurate results
• Compact design
• Reliability

Additional Information:
  • Item Code: Sigma-082
  • Minimum Order Quantity: 1 pc
Yes! I am interested
REQUEST CALLBACK
Approx. Rs 42,000 / pcs
Get Best Quote

Item code: Sigma 03FPL Friction Pipe Lines Apparatus
Friction Pipe Lines Apparatus this pipe line apparatus is highly demanded in the competitive markets of the day. We customized our pipe line apparatus as per market preferences. Offered pipe line apparatus is checked on quality provisions for supplying a flawless range.
Features Friction Pipe Lines Apparatus
• Durable
• Flawlessly finished
• Less maintenance
Experiments of Friction Pipe Lines Apparatus
• To determine the losses due to fiction in pipes
Utilities Required for Friction Pipe Lines Apparatus
• Electric supply 0.5 kW, 220V AC, Single Phase
• Water supply Tap water connection” BSP Distilled water @ 60 liters (optional)
• Floor Area with Drain facility



Additional Information:
  • Minimum Order Quantity: 1 pcs
Yes! I am interested
REQUEST CALLBACK
Approx. Rs 1.36 Lakh / pcs
Get Best Quote

Item code: Sigma 02FON Flow over Notch Apparatus
Flow Over Notch Apparatus Set up consists of a flow channel section, supply tank, measuring tank and pump for closed loop water circulation. The flow channel is fitted with arrangement for creating jet using different interchangeable notches. It also consist a hook gauge for measuring x-y coordinates of jet and a vernier pointer to measure the height of water in channel. The flow rate of water is measured using measuring tank and stop watch provided. A Trapezoidal Notch can be tested by adjoining 2 different notches.
Experiments Flow over Notch Apparatus
• To determine co-efficient of discharge using different notches.
Utilities Required for Flow over Notch Apparatus
• Electric supply 0.5 kW, 220V AC, Single Phase
• Water supply Tap water connection” BSP Distilled water @ 60 liters (optional)
• Floor Area with Drain facility



Additional Information:
  • Minimum Order Quantity: 1 pcs
Yes! I am interested
REQUEST CALLBACK
Approx. Rs 36,800 / Pc
Get Best Quote

Description Of Metacentric Height Apparatus A pontoon is allowed to float in a small tank having a transparent side. Removable steel strips placed in the model for the purpose of changing the weight of the model. Displacement of weight is measured with the help of a scale. By means of a pendulum consisting of a weight suspended to a long pointer the angle of tilt can be measured on a graduated arc. For tilting the ship model, a cross bar with two movable hangers is fixed on the model. Pendulum and graduated arc are suitably fixed at the center of the cross bar. A set of weights is supplied with the apparatus.
Experiments:
• Determination of the Met centric height and position of the Met centric height with angle of heel of ship model.
Specifications:
• Pontoon : Size 300 x 150 mm (Approx.) with a
• Horizontal Guide Bar for aiding weight.
• Material : Stainless Steel Pontoon
• Water Tank : Size 600 x 400 x 400 mm (Approx.)
• Front Window of Tank : made of Glass/Perspex
• A set of weights is supplied with the apparatus.



Additional Information:
  • Minimum Order Quantity: 1 Pc
Yes! I am interested
REQUEST CALLBACK
Approx. Rs 11,500 / Pc
Get Best Quote

Sigma-19 BA
Bending Of Beam Apparatus: Apparatus should consists of a mild steel beam 100cm long and 1.25cm x 4mm in cross section with graduations at every 10cm along the length. It should be supported on two knife edge supports 70cm apart with a 30cm overhang on one side. Reciprocal theorem can be verified by direct measurements of the deflections of various points with the help of a dial gauge due to a load placed at the reciprocal points.

 



Additional Information:
  • Minimum Order Quantity: 1 Pc
Yes! I am interested
REQUEST CALLBACK
Approx. Rs 48,500 / Pc
Get Best Quote

 

Sigma-20 FV
Flow Measurement By Venturimeter & Orifice meter Apparatus
DESCRIPTION:- The apparatus consists of two pipelines emerging out from a common manifold. One pipeline contain a Venturimeter, second contains an Orifice. The pressure tapings from the Venturimeter and Orifice meter are taken to differential manometer to measure pressure difference. The Venturimeter and Orifice meter are connected in parallel and anyone of them can be put in operation by operating valves provided at the downstream. These valves can also regulate the flow. Present Set-up is self contained water re-circulating unit, provided with a sump tank and a centrifugal pump. Flow control valve and by-pass valve are fitted in water line to conduct the experiment on different floe rate. Flow rate of water is measured with the help of measured with the help of measuring tank and stop watch.
EXPERIMENTS:
• To determine the Co-efficient of discharged through Venturimeter and Orifice meter
• To measure discharge through Venturimeter and Orifice meter as flow meters.
UTILITIES:
• Water Supply & Drain
• Electricity Supply:  Single Phase, 220 VAC, 0.5 kW
TECHNICAL SPECIFICATIONS:-
• Venturimeter            :           Material Clear Acrylic, Compatible to 1” Dia pipe
• Orificemeter             :           Material Clear Acrylic, Compatible to 1” Dia. Pipe
• Water Circulation     :           FHP Pump, Crompton / Sharp make
• Flow Measurement  :           Using Measuring Tank, Capacity 25 Ltrs.
• Sump Tank               :           Capacity 50 Ltrs.
• Stop Watch               :           Electronic
• Control Panel            :          On / Off Switch, Mains Indicator etc.
• Tanks will be made of Stainless Steel

 



Additional Information:
  • Minimum Order Quantity: 1 Pc
Yes! I am interested
REQUEST CALLBACK
Approx. Rs 72,500 / Pc
Get Best Quote

Sigma-22 JB
Journal Bearing Apparatus: Assisted by technically advanced facilities, this is designed by our skilled professionals who execute their work in an efficient and precise manner. Owing to their quality, offered range is highly appreciated around the globe as it is manufactured as per international standards. Our prestigious clients can avail this product from us at pocket friendly prices.
Features:
• Low maintenance
• Highly durable
• Precisely designed
Specifications:
• Journal Diameter 50 mm
• Bearing Diameter 55 mm
• Weights 4 adjustable weights
• Motor Variable speed FHP Motor
• Control Panel For speed control of motor
• Manometer 16 Tubes
• Oil recommended SAE 40

 



Additional Information:
  • Minimum Order Quantity: 1 Pc
Yes! I am interested
REQUEST CALLBACK
Approx. Rs 78,500 / Pc
Get Best Quote

Item code: Sigma 12RA Reynold’s Apparatus The apparatus consists of a glass tube with one end having bell mouth entrance, connected to a constant head water tank, at the other end a valve is provided to vary the flow rate. The tank is of sufficient capacity to store water. A capillary tube is introduced centrally in the bell mouth for feeding dye from a small container placed at the top of tank, through polythene tubing. By varying the rate of flow, the Reynold’s number is changed. This also changed the type of flow. Visual observation of dye (Thread) will indicate the type of flow, which can be confirmed from the Reynold’s number computed.

Present setup is self contained water re-circulating unit, provided with a sump tank and a centrifugal pump etc. Flow control valve and by pass valve are fitted in water line. Flow rate of water is measured with the help of measuring cylinder and stop watch. The apparatus consists of a glass tube with one end having bell mouth entrance, connected to a constant head water tank, at the other end a valve is provided to vary the flow rate. The tank is of sufficient capacity to store water. A capillary tube is introduced centrally in the bell mouth for feeding dye from a small container placed at the top of tank, through polythene tubing. By varying the rate of flow, the Reynold’s number is changed. This also changed the type of flow. Visual observation of dye (Thread) will indicate the type of flow, which can be confirmed from the Reynold’s number computed.

Present setup is self contained water re-circulating unit, provided with a sump tank and a centrifugal pump etc. Flow control valve and by pass valve are fitted in water line. Flow rate of water is measured with the help of measuring cylinder and stop watch.

 



Additional Information:
  • Minimum Order Quantity: 1 Pc
Yes! I am interested
REQUEST CALLBACK
Approx. Rs 32,500 / Pc
Get Best Quote

Sigma-36 SA
Sedimentation Apparatus: This apparatus is broadly appreciated for its sturdy construction, high performance, reliability and durability. The offered apparatus is highly demanded in the industry and is manufactured using optimum quality components and advanced technology. Also, this apparatus is checked on various quality parameters and is offered at market leading prices to the clients.
Features:
• Robustness
• Longer service life
• Excellent finish
Specifications:
• Electricity Supply: 1 Phase, 220 V AC
• Digital Balance, Cap. 250 gm, LC 0.01 gm
• Specific Gravity Bottle capacity 50 ml

 

 

 

 

 

 



Additional Information:
  • Minimum Order Quantity: 1 Pc
Yes! I am interested
REQUEST CALLBACK
Approx. Rs 62,500 / Pc
Get Best Quote

Sigma-26 TA
Tortion Apparatus Searle Type:
Specification: The other end of the rod is clamped tightly to a bracket. The pointers and scales are graduated in single degree and can be clamped at any position. Complete with ribbon, hooks and rods of steel and brass, but without weights.

 

 



Additional Information:
  • Minimum Order Quantity: 1 Pc
Yes! I am interested
REQUEST CALLBACK
Approx. Rs 1.45 Lakh / pcs
Get Best Quote

WIND TUNNEL:- SIGMA 456WT: This is a open circuit Wind Tunnel provides a region of controlled air flow into which models can be fitted at downstream of working section. The Tunnel consists of bell mouth shaped entry to guide the air smoothly into settling chamber and stabilizes the air flow this follows working section for test section where various models can be tested. Test section with acrylic sheet, will be provided for visual observation. Working section is followed by diffuser section which reduces the dynamic pressure at the exit. A fan coupled with motor is used to produce desired wind velocity.
Experimentation:

· To plot speed curve for wind tunnel.

· To study pressure distribution around (A) aerofoil (B) Cylinder (C) Sphere.

· To measure lift and drag on aerofoil model.

· To study the development of boundary layer along a plate in Tunnel.

Utilities Required:

· Electricity Supply : 3Phase, 440V AC, 3 KW

· Floor Area 10 x 3.5 m

Technical Details:

· Variable Speed Model : 3HP Crompton make motor with Speed Controller

· Fixed Speed Model : 3HP Crompton make motor

· Type: Open Type Wind Tunnel.

· Test Section: 250 x 250 x 1000 mm.

· Blower : Compatible Capacity

· Air Velocity: Maximum 30 m/s (in Test Section).

· Digital Force Indicator : For Lift and Drag force

· Multiple Manometer: 0-40° inclination with vertical axis.

· U Tube Manometer: Length 500 mm.

· Inclined manometer : 300 mm

· Pitot Static Tube : For Velocity Measurement



Additional Information:
  • Minimum Order Quantity: 1 pcs
Yes! I am interested
REQUEST CALLBACK
Approx. Rs 1.25 Lakh / Piece
Get Best Quote

Bernoulli's Theorem-SIGMA-368-BT:- Bernoulli's Theorem Demonstrator facilitates the students and the industrial professionals to explore the fundamentals of “Bernoulli's Theorem” in Fluid Mechanics. It states that, in a steady flow the sum of all forms of mechanical energy (kinetic, potential and pressure energy) in a fluid along a streamline is the same at all points on that streamline. It consists of classical venture of clear acrylic. A series of wall tapping allows measurement of static pressure distribution of convergent duct, while a total head tube is provide at the centre of throat. These tapping are connected to a bank of manometer tube. This unit has been designed with Hydraulic Bench to study the characteristic flow through convergent and divergent section. During the experiment, the water fed to the venture and the flow rate can be control by the gate valve at the outlet of venture. The venture is used to demonstrate the flow rate measurement and to determine the co-efficient of discharge.

Self contained system

Simple representation of concept

Direct measurement of static head

Seven pressure tapings along with tubes

Requires minimal installation

Robust and transparent Venturimeter

All tanks are rust proof

Technical Specifications:-

Test Section (Venture)

o Throat Diameter - 12mm,

o Upstream Diameter - 33 mm

o Upstream Taper - 10°

o Downstream Taper - 17°

o MOC - Acrylic (Transparent)

Manometer : 0 to 300 mm, Seven Tubes (Flexible & Transparent)

Reservoir Tank : 503 ´ 300 310 mm, Capacity - 40 Liters

Overhead Tank : 191 195 450 mm, Capacity - 16 Liters

Measuring Tank : 290 300 251 mm, Capacity - 23 Liters

Pump : 72 LPM, 0.5 HP, 230 V, 50 Hz Level Indicator : 20 cm

(Body mounted type)

Scope of Learning:-

To verify Bernoulli's Theorem.

To observe (visually) types of flow (laminar or turbulent) and calculation of Reynolds Number.



Additional Information:
  • Minimum Order Quantity: 1 Piece
Yes! I am interested
 
X

Download Brochure
Sigma Scientific Glass Company

Puneet Sharma (CEO)
Plot No. 61, Defence Colony, Sector B, Ambala Cant
Ambala - 133001
Haryana, India
Send Email
© Sigma Scientific Glass Company. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited