Defence Colony, Ambala, Haryana
Send E-mail
Send SMS
Home»Our Products»

Electronics Trainer Kit

We are manufacture, supplier and exporter of electronics instruments and and all type of Trainer kit.

Approx. Rs 10,000 / Piece
Get Best Quote
Product Details:
Minimum Order Quantity1 Piece
Body MaterialAcrylic
Operating frequency6.144 MHz
ROM8K bytes of EPROM
RAM8K bytes
Onboard Memory ExpansionUpto 64K bytes using 2732/2764/27128/6264/ 62256 with 1 socket of 28 pin
InterfaceRS-232C through SID/SOD Lines with Auto baud rate
Keyboard25/28 key hexadecimal
DisplaySeven segment display
We are offering high quality 8085 Microprocessor Trainer Kit With LED Display to our customers.


  • Battery back up for RAM with 3.6V rechargeable cell
  • Memory mapping definable by the user
  • 16 bit programmable TIMER/COUNTER using 8253
  • Additional serial port using 8251 (OPTIONAL)
  • Real Time Clock (OPTIONAL)
  • 24 I/O lines provided through 8255
  • Two modes of commands: Hex Key pad Serial mode
  • All address, data control lines are buffered and made available at the edge connector as per STD bus configuration
  • Powerful software commands like Relocate, String, Fill, Insert, Delete, Block Move, Examine/Compare Memory, Examine Register, Insert Data, Delete Data, Single Step, GO, Break Point in both Serial Keyboard mode
  • Facility for Downloading/Uploading files from/to PC
  • Enclosed in an attractive ABS plastic cabinet with cover
  • In-built Power supply
  • User’s Manual

Yes! I am interested
Approx. Rs 14,000 / Piece
Get Best Quote
Product Details:
Minimum Order Quantity1 Piece
On board Memory Capacity128KB of RAM 128KB of EPROM
Memory available to the user16K bytes of RAM
InterfaceRS-232C, USB
We are offering 8086/88 Microprocessor Trainer Kit With LED Display to our customers.


  • Based on Intel’s 8086/8088 CPU operating at 2.5/5MHz 
  • 16K bytes of EPROM loaded with powerful monitor program (2764/27128)
  • Battery backup provided for RAM area
  • 48 I/O lines through 2 nos. of 8255
  • 16 bit Timer/Counter through 8253
  • RS-232C for CRT Terminal through 8251 Baud rate selection through DIP switch from 110-19,200 baud
  • USB Interface to connect kit to computer
  • V-USB Terminal Software to operate kit from USB Port to execute all commands like Examine Mem, Execute, Assembler Dissembler etc
  • Provision for EPROM Programmer for 2732/2764/27256 with 28 pin ZIF with facility to Program, Verify, List Blank Check for Even, Odd Continuous bytes
  • 25/28 keys hexadecimal keyboard eight seven segment display.
  • On board Analog to Digital Converter
  • On board Digital to Analog Converter
  • EPROM Programmer
  • Onboard sockets provided to facilitate the use of 8089 I/O processor 8087 Numeric Data Processor (Optional)
  • Resident Monitor with two modes of operation:– Keyboard mode Serial mode
  • Facility for uploading/downloading of files from/to PC
  • All Address, Data and Control Signals, are buffered and available at the FRC connector
  • Enclosed in an attractive ABS plastic cabinet
  • In-built Power Supply
  • User’s Manual

Yes! I am interested
Approx. Rs 9,000 / Piece
Get Best Quote
Product Details:
Minimum Order Quantity1 Piece
Output Voltage12V & 5V
Current250 mA

Network Theorem Trainer Kit is used for verification of the three theorems. They are Superposition theorem, Reciprocity theorem and Compensation theorem. In order to perform these, the trainer has necessary facilities, like variable voltage source, assorted values of resistors, center-Zero current and built in power supplies. Experiments are performed by using patch cords.

Study of Superposition Theorem: A superposition theorem is an important concept in circuit analysis. It allows you to determine a voltage across a component or a branch current, by calculating the effect of each source in multiple-source circuits, the circuit current from each source can be calculated individually by algebraically adding each contribution. There are two or more energy sources.

Study of Reciprocity Theorem: In any system composed of linear impedance, if a voltage source V is applied between any two terminals and the current, I, is measured in any branch, their ratio, called the transfer impedance, will be unchanged if the position of the meter and source are interchanged. The current from the source need not be the same.

Study of Compensation Theorem
: Impedance in a network may be replaced by an ideal voltage source who’s generated EMF at any instant is equal to the instantaneous potential difference across the impedance.


  • Passive components: Suitable value resistors to perform the above task.
  • Enclosure: The entire instrument is housed in an ergonomically designed.

Note: It is desirable to have an external Digital Multimeter.

Yes! I am interested

Download Brochure
Sigma Scientific Glass Company

Puneet Sharma (CEO)
Plot No. 61, Defence Colony, Sector B Ambala Cantt
Ambala - 133001
Haryana, India
Send Email
© Sigma Scientific Glass Company. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited